- Get link
- X
- Other Apps
AeroCool Advanced Technologies introduces the XPredator X3 line of enclosures.
Moscow, November 9, 2012 - AeroCool Advanced Technologies (AAT), one of the world's leading manufacturers of enclosures, power supplies, accessories and peripherals for computer applications, presents the Xpredator X3 series of enclosures. The Xpredator X3 family of enclosures is designed for both amateur gamers and professionals.
The new series of cases will especially please fans of computer games who are not indifferent to the appearance of the computer. Aggressive design with angular elements of the top panel, which resemble the ridge of a predator, bold and bright colors - all this will not allow new products to go unnoticed.
The cases, made in the High Mid Tower form factor, are made of 0.7 mm thick SECC steel and are designed for installation of ITX / ATX / Micro ATX system boards in them, the dimensions of the cases are 533 x 223 x 527 mm.
The chassis design and standard equipment provide ample opportunities for tuning and configuration flexibility of the game or overclocking system, depending on the individual wishes of the consumer. Thus, the system based on Xpredator X3 supports the installation of up to three 5.25-inch drives. Using adapters and sleds, up to eight hard drives and one external 3.5-inch device can be installed into the case. In addition, in the upper part of the chassis provides a surface with a rubberized coating to connect an additional 2.5-inch hard drive. The interior of the case is optimized for the use of modern large graphics cards up to 310 mm long. Simplicity of installation of the system components is guaranteed due to the rejection of screw fasteners, the presence of a hidden cable placement system and special clips pre-installed on the motherboard platform. The width of the case provides for installation on the processor cooler up to 186 mm in height, only if you need a powerful fanless computer, then it is here.
Particular attention is paid to the design of the cooling system. Circulation of internal cooling air flow is provided by two fans: 120 mm on the rear wall and 200 mm on the front panel of the case. In general, the case supports the installation of up to 9 additional fans, including seating for the 120-mm fans in front of the drive compartment. The top panel of the case is made in the form of blinds to provide additional ventilation of the filling of the case.
The ease of use of the system based on Xpredator X3 is provided by convenient access to the most popular interfaces - USB 3.0 ports, microphone and audio, located directly on the top panel of the case. It also includes an adapter from USB 2.0 to USB 3.0, which allows you to connect external USB 3.0 connectors to the connectors for USB 2.0 ports on the motherboard.
Now every gamer can please himself and his computer with a modern “predatory” case from AeroCool. New items are already available in the Russian market at a retail price of 3,500 rubles.
Specifications:
Case type High Mid Tower
Material Steel SECC 0.7 / 0.6 mm
Motherboard ITX / ATX / Micro ATX
Body dimensions 533 mm (D) x 233 mm (W) x 527 mm (H)
Disk drive compartments 3 x 5.25 ″ (external) / 8 x hard disk (internal) / 1 x 3.5 ″ hard disk (external) + 1 x 2.5 ″ hard disk (hot swap slot)
Expansion Slots 8
Maximum card length for a PCI slot is 310 mm
2 x USB 3.0 / Audio + Mic I / O Ports / 2 x Fan Controller
CPU cooler height limit (without side fan) 186 mm
The article is based on materials .
Comments
Post a Comment